HTPOFAmerica

Intertek LX WUA400-II 4.0HP Dual Speed Spa Pump 230V 56 Frame 2" Ports

(No reviews yet) Write a Review
SKU:
ASP56WUA400-II
Shipping:
Calculated at Checkout
  • WUA400-II 56Fr Intertek LX Pumps 2" X 2" 4.0HP 2 Speed 230V Video How To
  • Compare your screws to be sure that this is the correct wet end.
  • Compare your wet end to this picture to be sure that this is the correct wet end.
  • The original pump looks like this...
  • When putting your cord back on the new pump note C= Common or the White Wire, L= Low Speed and is usually the Black Wire and rarely the Red Wire, H=High Speed and is usually the Red Wire but occasionally the Black, Green = Ground or the Green wire. They way you can tell if you have it wired correctly is when you power up the pump should go into Low Speed First. If it goes into High Speed you need to power down and reverse the red & black wires and power back up and verify it goes into Low Speed first. If you leave it wrong it will overheat and damage the Hot Tub especially during warm weather...
  • WUA400-II 56Fr Intertek LX Pumps 2" X 2" 4.0HP 2 Speed 230V Video How To
  • WUA400-II 56Fr Intertek LX Pumps 2" X 2" 4.0HP 2 Speed 230V Video How To
  • WUA400-II 56Fr Intertek LX Pumps 2" X 2" 4.0HP 2 Speed 230V Video How To
  • WUA400-II 56Fr Intertek LX Pumps 2" X 2" 4.0HP 2 Speed 230V Video How To
  • When putting your cord back on the new pump note C= Common or the White Wire, L= Low Speed and is usually the Black Wire and rarely the Red Wire, H=High Speed and is usually the Red Wire but occasionally the Black, Green = Ground or the Green wire. They way you can tell if you have it wired correctly is when you power up the pump should go into Low Speed First. If it goes into High Speed you need to power down and reverse the red & black wires and power back up and verify it goes into Low Speed first. If you leave it wrong it will overheat and damage the Hot Tub especially during warm weather...
  • WUA400-II 56Fr Intertek LX Pumps 2" X 2" 4.0HP 2 Speed 230V Video How To
  • WUA400-II 56Fr Intertek LX Pumps 2" X 2" 4.0HP 2 Speed 230V Video How To
  • WUA400-II 56Fr Intertek LX Pumps 2" X 2" 4.0HP 2 Speed 230V Video How To
  • WUA400-II 56Fr Intertek LX Pumps 2" X 2" 4.0HP 2 Speed 230V Video How To
  • WUA400-II 56Fr Intertek LX Pumps 2" X 2" 4.0HP 2 Speed 230V Video How To
  • WUA400-II 56Fr Intertek LX Pumps 2" X 2" 4.0HP 2 Speed 230V Video How To
$399.99

Description

This dual speed complete spa pump from Intertek LX delivers 4.0 horsepower with 12.0/4.4 amp rating and features a 56 frame motor design. Model designations on the label may include WUA-400-II, WP-400-II, or LP-400-II. Instructional videos available demonstrating proper pump identification procedures and compatibility verification methods. Physical dimensions: approximately 7 1/4" across pump face, 7 3/8" measured from bottom to top of volute pressure side, and 15" from rear to front edge. Both suction and pressure side connections are designated 2" x 2" with thread-to-thread measurement of 3".

IMPORTANT: This pump design shares similar appearance with Aqua-Flo and CMP models and is interchangeable when replacing the complete pump assembly.

Should your existing wet end include a bleeder barb and your original bleeder screws have flat head screw slots, verify compatibility before ordering.

View AllClose

Related Products

Related Products