Hot Tub Parts by Tub Brand

This part is a Sundance Jacuzzi, Filter Suction Adapter Fitting, 2" MPT, Filter Pipe w/ Jam Nut.. This part threads into the wall of the hot tub and you slip the open hole end of the filter over this part then lock the crown side of the filter into...

This part is a Diverter in a Kit which Includes a Graphite Gray Diverter Valve, (3) 2" Couplers, (3) 6" Pieces of 2" Flex Pipe and (2) 2" Street Slip Ells. This Kit can be used to cut out an old Diverter and install this new Diverter in it's place. You...

This part is a 3 3/4" Wide 2"slip x 2"slip x 2"slip Spa Diverter Complete Assembly Graphite Gray Valve.  The 2" Slip fittings receives a 2" pipe or fitting that would measures about 2 3/8" OD.. We also offer This Diverter in a Kit...

This Pump is a Replacement for a 0974101-03 or 0974001-03 1.5 HP 230V 8.0/2.6 Amp (2) Speed 48 Frame Complete Pump  It is about 7 1/4"" across the face of the pump, it measures about 7 3/8" from the bottom to the top of the pressure side of the...

This part is a Complete Wet End for Vendor Code 3536 with pump numbers 39578-03, 0982601-03 or 37066-03. This is a LX Brand Replacement Wet End Pump with a  2" X 2" 2.5HP 230V Vendor Code 3536 only.   It is about 7 1/4"" across the face of the...

This part is a Balboa 6 Button Overlay for a VL620S or VL600 Topside with Two Pumps and Light System. On the overlay starting at the left of the readout it reads Jets, Aux, Light and to the right is Warm, Mode, Cool. This Overlay has an Adhesive back you...

This parts is an Artesian, Resort Series, Filter, Cartridge, 50sqft, 2" male pipe thread, 6-3/4" Wide, 8" Tall.. Note The small filter found in the center between these filters can be found here.. Artesian, Resort Series, Filter, Cartridge, 6 sqft,...

This part is a Heater Complete with the Sensor set and built in pressure switch an exact generic replacement for the original Watkins No Fault 6000 76227 heater... This is a generic replacement for the various versions of Watkins/Hot Spring/Tiger...

This part is a Heater Complete with the Sensor set and built in pressure switch an exact generic replacement for the original Watkins No Fault 4000 76228 heater...It will only work in countries that use a 60 Hz electric cycle. This is a generic...

This part is a Hot Tub 2 3/8" Mini Light Lense Kit with the gasket, Nut, and Light Holder. The face size is 2 3/8" and the hole size is Approx. 1 5/8" to 1 3/4". This fits Artesian Spas and other Brand tubs that have a small light lens. The reason...

Master Spa Outer filter PMA-R1 for select H2X®, Twilight, and Legend Series™ spas and hot tubs. This Eco Pur Charge product features advanced filtration technologies.   For the part that fits into the center of this filter click this...

Eco Pur Charge filters by Master Spas can help reduce your chlorine usage by up to 75%, while also extending the lifetime of your spa or hot tub. The new Eco Pur Charge Filter is the replacement for all previous Eco Pur Mineral cartridges for Master...