Description
Complete 1.5HP Impeller Assembly Kit with PS-200 Seal and Two Bearings for Aqua-Flo XP2 and FMXP2 Wet Ends
This comprehensive replacement kit includes everything needed to restore your Aqua-Flo pump's performance. Designed specifically for 1.5 Horsepower motors operating at approximately 9.0 Amps on 230V systems, this assembly features critical specifications: 2 1/8 inch eye width, 5/16 inch vane width, and 4 inch outer diameter.
Key Specifications:
- Manufacturer Part Number: 91694150
- Eye Width: 2 1/8"
- Vane Width: 5/16"
- Outer Diameter: 4"
- Horsepower Rating: 1.5 HP
- Compatible with PS-200 Seal (included in kit)
- Fits 48 and 56 Frame Aqua-Flo Wet Ends
Frame Compatibility Guide:
This impeller installs between the face and volute of your wet end. Determine your frame size by measuring motor through-bolt spacing:
- 48 Frame: 3 5/8" between bolts or 5 3/16" in X pattern with 1/4" bolt heads
- 56 Frame: 4 1/8" between bolts or 5 3/4" in X pattern with 5/16" bolt heads
CRITICAL BEARING NOTICE: These bearings feature a 17mm center hole. Some Aqua-Flo motors require 16mm bearings. Measure your motor shaft carefully before ordering, as 16mm bearings are not available in this kit configuration.
Amperage Reference Chart for Proper Sizing:
- 115V / 1 HP Motors: 11-12.0 Amps on high speed
- 230V / 1 HP Motors: Approximately 8.0 Amps on high speed
- 230V / 1.5 HP Motors: Approximately 9.0 Amps on high speed
Important Sizing Warning: Never install a larger horsepower impeller thinking it will increase jet strength. Oversized impellers cause motor overheating and permanent damage. Always match the impeller horsepower to your motor's rated capacity using the amperage chart above.
What's Included:
- One 1.5HP Impeller (2 1/8" eye, 5/16" vane, 4" OD)
- One PS-200 Shaft Seal
- Two Replacement Bearings (17mm center hole)
Professional tip: Always replace the shaft seal when installing a new impeller to ensure optimal performance and prevent leaks. This kit provides all essential components for a complete pump rebuild.
All sales final - verify compatibility with your specific pump model and motor specifications before ordering.
