PVC Plumbing Fittings

This part is a 3/4" Spin To Win Kit for 3/4" Plumbing repairs where you are connecting old 3/4" Plumbing that measures about 1" OD to new plumbing.. The kit includes a 6" Piece of 3/4" Flex Pipe that measures about 1" OD and a 3/4" Coupler.. This type...

This part is a 45 Degree 2" Street X 2"Slip PVC Plumbing Fitting that has a Threaded hole for a Pressure Switch. The Union glues into a 2" fitting on one side and then receives the fitting on the other side. It will Glue into any 2" fitting to make a...

This Connect Kit is an Air Bleeder barbed plug, 3/8" X 3/8" Barbed Coupler, 4" of 3/8" Tubing and Silicon sealer usually used on a Waterway Hot Tub Pump Face to bleed the air off the pump while filling the tub up. I have seen these fittings in many...

This part is a Tee that is 2"Slip x 3/4" FPT x 2" Slip.. This part is usually found in plumbing with spigot screwed into it.. Note there are 2 Spigot sizes 3/4" and 1/2" Threaded..

This part is a 3/4" Barb x 3/4" x 3/4" Barbed Tee used to couple 3/4" ID Tubing together. Other Parts Normally used with this part: Tubing 3/4" Inside Diameter 1" OD (1) Foot Used on Water Manifolds and More (2) Feet of Tubing 3/4" Inside Diameter...

This part is a 3/4" Barb x 3/8" x 3/4" Barbed Tee used to couple 3/4" ID and 3/8" ID Tubing together. Other Parts Normally used with this part: Tubing 3/4" Inside Diameter 1" OD (1) Foot Used on Water Manifolds and More (2) Feet of Tubing 3/4"...

This Kit is a Barb Adapter, 3/4" Barb x 2" Spigot... that will glue inside of a 2" Slip Manifold or other 2" Slip fitting and is usually used to couple a 3/4" water tube back to the barb on the fitting.. Also Note: If you order a manifold kit that...

This Kit is a Barb Adapter, 3/4" Barb x 2" Spigot to 3/4" X 3/4" Barb Coupler Kit, Fits 2" Slip Water Manifolds that features (2) Clamps, 4" 3/4" ID Tubing and (1) 3/4" x 3/4" Barb coupler..  that will glue inside of a 2" Slip Manifold or other...

This part is a Reducing Tee that is 1-1/2" Slip x 1/2" Female Pipe Thread x 1-1/2" Slip... The 1 1/2" Sides receive pipe and fittings that would measures about 1 7/8" OD on each end and a 1/2" Female pipe thread 3/4" OD..

This Manifold is  1 1/2" input which measures 1 7/8" Inside Diameter x (4) 1" outputs that measure 1 1/4" Inside Diameter.  Note: These manifolds are new old stock so they will not be perfect aesthetically...   Barb/Port Size 1" ...

This part is a Reducing Tee that is 1-1/2" Slip x 1/2" Slip x 1-1/2" Slip... The 1 1/2" Sides receive pipe and fittings that would measures about 1 7/8" OD on each end and a 1/2" pipe or fitting that would measure about 3/4" OD..

This part is a Reducing Tee that is 1-1/2" Slip x 3/4" Female Pipe Thread x 1-1/2" Slip... The 1 1/2" Sides receive pipe and fittings that would measures about 1 7/8" OD on each end and a 3/4" Threaded fitting that would measure about 7/8" OD like a...