PVC Plumbing Fittings

You are buying an Air Bleeder Mountable Bleeder Fitting with a removable plug, a 1/4" Mpt X 3/8" Barb plug. This style set up is is usually found in Dimension One Hot Tubs in the Filter area and other brands as well.. Note; The plug is not sold...

Manifold Wye Full Description Features: 22.5 degree wye 1 inch slip X 1 inch slip X 1 inch slip The slip fitting on this part would measure about 1 1/4" Inside Diameter on each opening.. Improves performance Available in two different...

You are buying a (1) 45° 1 1/2" Slip X 1 1/2"Slip PVC Plumbing Fitting. The 45° ELL receives a 1 1/2" fitting on each side which would measure 1 7/8" Inside Diameter. Any 2"  fitting (which measures 1 7/8" outside diameter) will glue into...

This item is a (4) Way Barbed Coupling used to couple 3/8" ID hose together. 3/8 Inch Barb X 3/8 Inch Barb through and a tee Barb Coupling 3/8" barb and 3/8" barb... This part is used on pump bleeder systems many time where the bleeders are attached...

See the Informational videos here first. You are buying (4) 2" Spigot X Dead End X (6) 3/4" Barbs manifold, (4) 3/4" Plugs, 6" of 2" Flex and a Coupler Basic Replacement Kit. The Kit consists of (3) Manifolds with (24) 3/4" Barbs, a 2"...

This part is a Replacement Bottom Drain Fitting Kit found on Artesian and Resort Hot Tubs. Remove the cracked inside the floor top Fitting and replace with this one by adding the screwing the new face into place. Although this is a complete kit including...

You are buying on a Renu Kit for 1" Street X (4) 3/4" Barbs manifold to be used to replace old manifolds with 3/4 or 1" glue in white pipes. The Manifold recieves a 1" pipe on the slip side which would measure about 1 1/4"...

You are buying on a Renu Kit for 1" Street X (4) 3/4" Barbs manifold and Glue to be used to replace old manifolds with 3/4 or 1" glue in white pipes. The Manifold recieves a 1" pipe on the slip side which would measure about...

You are buying on a Renu Kit for 1" Street X (4) 3/4" Barbs manifold and Glue to be used to replace old manifolds with 1/2" glue in white pipes. The Manifold recieves a 1" pipe on the slip side which would measure about 1...

You are buying on a Renu Kit for 1" Street X (4) 3/4" Barbs manifold to be used to replace old manifolds with 1/2" glue in white pipes. The Manifold recieves a 1" pipe on the slip side which would measure about 1 1/4" inside...

You are buying on a 1" Street X (4) 3/4" Barbs manifold. The Manifold recieves a 1" pipe on the slip side which would measure about 1 1/4" inside Diameter and then glues inside of a slip on the street side on the other...