PVC Plumbing Fittings

This part is a 1/2" Spin To Win Kit for 1/2" Plumbing repairs where you are connecting old 1/2" Plumbing that measures about 3/4" OD to new plumbing.. The kit includes a 6" Piece of 1/2" Flex Pipe that measures about 3/4" OD and a 1/2" Coupler.. This...

This part is an Air Bleeder barbed plug and O-Ring for Jacuzzi and Sundance Piranah Pump Faces Only.. Hot Tub Pump Faces to bleed the air off the pump while filling the tub up.  This barb is usually replaced because the barb is broken off and...

This part is (1) 1/8"x 1/8" X 1/8" Barbed Tee In-line Air Bleed that fits 1/8" OD , 3/16" ID Clear Hose on each side. These Will prevent very sensitive air switches from randomly activating due to thermal expansion of air and water vapor..  

This part is a 1" Spin To Win Kit for 1" Plumbing repairs where you are connecting old 1" Plumbing that measures about 1 1/4" OD to new plumbing.. The kit includes a 6" Piece of 1" Flex Pipe that measures about 1 1/4" OD and a 1" Coupler.. This type kit...

This Kit is a 1" Spin To Win Glue Kit for 1" Plumbing repairs where you are connecting old 1" Plumbing that measures about 1 1/4" OD to new plumbing.. The kit includes a 6" Piece of 1" Flex Pipe that measures about 1 1/4" OD and a 1" Coupler and (1) 4oz...

This item is a (6) Way Barbed Coupling used to couple 3/4" main hoses and 3/8" ID hose together. 3/4 Inch Barb X 3/4 Inch Barb through and (3) tees Barb Coupling 3/8" barb and 3/8" barb... This part is used on pump bleeder systems many time where the...

You are Buying a Lo-Profile Drain Assembly, 3/4" Barb, Black, 1-15/16" Face Width Replacement Bottom Drain Fitting Kit found on many brands of Hot Tubs. Remove the cracked inside the floor top Fitting and replace with this one by simply adding silicon...

You are Buying a Silicone Kit & Lo-Profile Drain Assembly, 3/4" Barb, Black, 1-15/16" Face Width Replacement Bottom Drain Fitting Kit found on many brands of Hot Tubs. Remove the cracked inside the floor top Fitting and replace with this one by...

This Kit is a 1-1/2" Manifold Coupler Kit for 1-2 Manifolds. The Kit consists of (1) 1 1/2" Coupler, 1 1/2"Slip X 1 1/2"Slip (6") of 1 1/2" Flex Pipe, (1) 1/4 Pint of Christy's Red Hot Blue Glue and (1) 1/4 Pint of Christy's Purple Primer. The kit...

This Kit is a 1 1/2" Coupler and a 6" Piece of 1 1/2" Flex Pipe used when gluing new plumbing to old plumbing. We call this Technique "Spin it To Win it" Meaning you spin the coupler onto the old plumbing when you are gluing new to old and then purple...

"Magicmend" Pipe extenderSimply cut the bad fitting and remove it from the system. Glue the correct size Magicmend into place and replumb your new fitting  

You are buying on a 2" Slip X 2" Barb Adapter.. This adapter glues inside of a 2" PVC plumbing fitting and a 2" Inside Diameter Tube glues onto the barb..  This part is found in Strong Spas and some others I will list them as I find out...