Jet Pumps, Complete

This Pump is a 48Frame 115V 2 Speed with a 1.5 HP Wet End that features a 1 1/2" x 1 1/2" Side Discharge Wet End that measures about 2 5/16" across the threads...  High speed Amperage is 13.3 and low speed is 4.1 Amps..     Complete Pump...

This Pump is a Complete Pump for Watkins Hot Spring Hot Tubs under the numbers 0982701 with a Vendor Code 04281... This pump is a 48Frame 230V 2 Speed with a 2.0 HP Wet End that features a 2" x 2" inlet and outlet Wet End that measures about 3" across...

This Jet Pump is found from the factory Rarely in hot tubs so be sure you are choosing the correct one.   This pump is a 56 frame XP2e called 5.0HP I would call it a 4.5HP 230V Side Discharge wet end with a 2 1/2" suction side which measures about...

This Jet Pump is found from the factory Rarely in hot tubs so be sure you are choosing the correct one.   This pump is a 56 frame XP2e called 4.0HP I would call it a 3.0HP 230V Side Discharge wet end with a 2 1/2" suction side which measures about...

This Jet Pump is found from the factory Rarely in hot tubs so be sure you are choosing the correct one.   This pump is a 56 frame XP2e called 3.0HP I would call it a 2.0HP 230V Side Discharge wet end with a 2 1/2" suction side which measures about...

This part is a Pump Bleeder Barb for some Watkins Wavemaster LX Pumps and others.. It is 1/2" Barb x 1/4"Mpt and is used with an unusually large bleeder line.. The line is 1/2" Inside Diameter not 3/8" Inside Diameter like most bleeder lines.. This...

As of 11/2024 Aqua-flo has started to send this pump with a capacitor bump in an odd spot that may affect your installation. In light of that we are now sending this pump assembly out as a separate 10.5 Amp motor and a genuine 2.5 HP XP2 wetend. You...

Note: When you order this pump you will receive the newest version of the pump which is a baseless 2.5 HP pump and you will receive the base as well.. This will be able to be installed in any position but you will have to install the base which may not...

Note: When you order this pump you will receive the newest 2.5 HP version of the pump which is a baseless and you will receive the base as well.. This will be able to be installed in any position but you will have to install the base which may not line...

This 2.0 Horse Power 230V 10.0/3.0 Amp (2) Speed 48 Frame Complete Pump is a Lingxiao LX Brand Pump. These pumps usually have the part number 48WUA2002C-II on the label for a Watkins Version. Watch the video for instruction on how to...

This pump is an Aqua-Flo XP2 48frame 230V 2 Speed with a 2" x 2" Wet End  that measures about 3" across the threads.. The amperage is 8.5 Amps on high speed and 2.8 Amps on low speed and this pump will work as a one or speed pump.. If you need...

Note: When you order this pump you will receive the newest version of the pump which is a baseless and you will receive the base as well.. This will be able to be installed in any position but you will have to install the base which may not line up with...