Pump Wet Ends and Related Parts

This part is a Complete 4HP Aqua-Flo 2" x 2" ( Which measures about 3" Across the Threads) Side discharge 48 frame wet end for XP2 pumps. This wet end is used with a 48 frame motor that would have about 14.0 Amps on High Speed on a 230V motor and...

This is a .5HP or 1/2HP Impeller for an Aqua-Flo 48 Frame Side or Center Discharge FMHP, FMCP, FMVP, and TMCP Series Wet End .5HP Motor that has about 6.0 Amps on High Speed at 230V and 6-7.0 Amps at 115V. This Impeller fits between the Face and the...

(25) Tubing Clamps, Fits Tubing 3/8" I.D. x 1/2"O.D., Double Wire, for Air System Manifolds, Jet Bodies, Pump Bleeders and other items that 3/8" Barbs..  Links to related parts: (1) Tubing Clamp, Fits Tubing 3/8" I.D. x 1/2"O.D., Double Wire, for...

(1) Tubing Clamp, Fits Tubing 3/8" I.D. x 1/2"O.D., Double Wire, for Air System Manifolds, Jet Bodies, Pump Bleeders and other items that 3/8" Barbs..  Self-compensating hose clamp expands/contracts with temperature change Cannot be over/under...

This part is a Universal Air Bleeder 1/4" Mpt X 3/8" Barb plug usually used on Hot Tub Pump Faces to bleed the air off the pump while filling the tub up. I have seen these fittings in many brands of Hot Tubs just compare the pictures and measurements...

This Kit is a Air Bleeder 1/4" Mpt X 3/8" Barb plug and Silicon sealer usually used on Hot Tub Pump Faces to bleed the air off the pump while filling the tub up. I have seen these fittings in many brands of Hot Tubs just compare the pictures and...

This part is a Air Bleeder barbed plug usually used on a Aqua-Flo and CMP Hot Tub Pump Faces to bleed the air off the pump while filling the tub up. I have seen these fittings in many brands of Hot Tubs just compare the pictures and measurements with...

This kit is a Air Bleeder barbed plug and Silicon sealer usually used on a Aqua-Flo and CMP Hot Tub Pump Faces to bleed the air off the pump while filling the tub up. I have seen these fittings in many brands of Hot Tubs just compare the pictures and...

This kit is anAir Bleeder barbed plug and Silicon sealer usually used on a Waterway Hot Tub Pump Face to bleed the air off the pump while filling the tub up. I have seen these fittings in many brands just compare the pictures and measurements with your...

This part is a 12" Piece of 3/8" Clear Tubing used with Air Valves... If you need 3 feet order (3x) and it will ship uncut.. This tubing measures 3/8" Inside Diameter and 1/2" O.D. and is used in most Air Applications on most tubs from the air...

Aqua-Flo Xp2 6.1" or 6.3"and XP2e Flo-Master Pump Face O-Ring fits around the Face of a Xp2 Pump Face exclusively for An Aqua-Flo Xp2 pump which has 2" inlet and outlet which measures about 3" across the threads...  Part Type   O-Ring ...

This part is No Longer Available.. You have to choose a complete wet end to get this part..  This part is the Volute or the back part of a 56 Frame 6.1" Aqua-Flo XP2 Wet End.. We offer the entire wet end and other parts see the list below.. See the...