Aqua-Flo Impellers and Parts
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Impeller & Seal (2) Bearing Kit Aqua-Flo XP2 1.0 HP 2 1/8" Eye with 1/4" Vane Width 3 7/8" OD
HTPOFAmerica
MSRP: $99.99$74.99This is a 1HP (2) Bearing, Seal & Impeller Kit with a 2 1/8" Eye with 1/4" Vane Width and 3 7/8" OD for an Aqua-Flo 48 or 56 Frame Wet End 1.0HP Motor would be about 8.0 Amps on high speed at 230V or 12.0 Amps at 115V. This Impeller fits...MSRP: $99.99$74.99 -
How To Video Aqua Flo XP2 or XP2e Impeller Identification Methods How To
Spa Guy How To Videos
$0.00In this Video The Spa Guy shows you how to identify what Impeller you need to replace your Aqua-Flo Xp2 or XP2e pump impeller... Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save$0.00Qty in Cart: 0Quantity:Price:$0.00Subtotal: -
How To Video Aqua Flo XP2e Leaking Pump Replace Seal Short Version Hot Tubs How To
Spa Guy How To Videos
$0.00In this Video the Spa Guy show you how to install a 200 seal in an Aqua-Flo Wet End.. This is the seal only version... For the full version look in The Spa Guy's How To Video Library... Save Save Save Save Save Save Save Save Save Save Save Save Save...$0.00Qty in Cart: 0Quantity:Price:$0.00Subtotal: -
Impeller, Aqua-Flo, XP2E, 2.0HP for (230V) 10 Amps or (115V) 16 Amps Eye Diameter 2 5/8"
HTPOFAmerica
MSRP: $44.74$34.99This part is an Aqua-Flo XP2 Impeller for a 2.0HP Motor which would have an Amperage Rating of about 10.0Amps on High Speed at 230V and 16.0 Amps on High Speed at 115V... It will also be a 56Frame motor which would have a 5/16" head on the through bolts...MSRP: $44.74$34.99 -
Impeller, Aqua-Flo, FMHP, FMCP, TMCP, FMVP, 0.75HP
HTPOFAmerica
MSRP: $44.99$34.99This is a .75HP or 3/4HP Impeller for an Aqua-Flo 48 Frame Side or Center Discharge FMHP, FMCP, FMVP, and TMCP Series Wet End .75HP Motor that has about 7.0 Amps on High Speed at 230V and 7-8.0 Amps at 115V. This Impeller fits between the Face and the...MSRP: $44.99$34.99 -
Impeller, Aqua-Flo, XP2E, 4.0HP for (230V) 14 Amps Eye Diameter 2 5/8"
HTPOFAmerica
MSRP: $44.74$34.99This part is an Aqua-Flo XP2 Impeller for a 4.0HP Motor which would have an Amperage Rating of about 14.0Amps on High Speed at 230V and Not applicable for 115V Pumps... It will also be a 56Frame motor which would have a 5/16" head on the through bolts.....MSRP: $44.74$34.99 -
XP2 1.0 HP Impeller Aqua-Flo 2 1/8" Eye with 1/4" Vane Width 3 7/8" OD 230/8A or 115/12A
HTPOFAmerica
MSRP: $44.99$34.99This is a 1HP Impeller with a 2 1/8" Eye with 1/4" Vane Width and 3 7/8" OD for an Aqua-Flo 48 or 56 Frame Wet End 1.0HP Motor would be about 8.0 Amps on high speed at 230V or 12.0 Amps at 115V. This Impeller fits between the Face and the Volute...MSRP: $44.99$34.99 -
Impeller, Aqua-Flo, XP2E, 3.0HP for (230V) 12 Amps Eye Diameter 2 3/8"
HTPOFAmerica
MSRP: $44.74$34.99This part is an Aqua-Flo XP2 Impeller for a 3.0HP Motor which would have an Amperage Rating of about 12.0Amps on High Speed at 230V and Not applicable 115V Pumps... It will also be a 56Frame motor which would have a 5/16" head on the through bolts... If...MSRP: $44.74$34.99 -
Impeller, Aqua-Flo, XP2E, 2.5HP for (230V) 11 Amps Eye Width 2 5/8"
HTPOFAmerica
MSRP: $44.74$34.99This part is an Aqua-Flo XP2 Impeller for a 2.5HP Motor which would have an Amperage Rating of about 11.0Amps on High Speed at 230V and is Not Applicable for 115V Pumps... It will also be a 56Frame motor which would have a 5/16" head on the through...MSRP: $44.74$34.99 -
Impeller, Aqua-Flo, FMHP 1 1/2" Side, FMHP, FMCP, TMCP, FMVP, 2.0HP, 91693701
HTPOFAmerica
MSRP: $44.99$34.99This is a 2HP Impeller for an Aqua-Flo 48 Frame Side or Center Discharge FMHP, FMCP, FMVP, and TMCP Series Wet End 2HP Motor that has about 10.0 Amps on High Speed. This Impeller fits between the Face and the Volute of an Aqua-Flo FMHP, FMCP, FMVP, and...MSRP: $44.99$34.99 -
Motor Bearing High Quality 6203 15.9mm FITS Some MOTORS
HTPOFAmerica
MSRP: $31.20$14.99You are buying (1) Bearing that fit some motors that are used in hot tubs, usually small 48 frame motors and some circulation pumps, this bearing is 15.9MM ID x 40MM OD. Some of the motors this fits are A.O.Smith/Regal Beloit, Century/Regal Beloit,...MSRP: $31.20$14.99 -
XP2 3.0 HP Impeller Aqua-Flo 2 1/8" Eye with 3/8" Vane Width 4 3/8" OD 230/12A
HTPOFAmerica
MSRP: $44.99$34.99This is a 3HP Impeller with a 2 1/8" Eye with 3/8" Vane Width and 4 3/8" OD for an Aqua-Flo 48 or 56 Frame Wet End 3.0HP Motor which would have about 12.0A on high speed. This Impeller fits between the Face and the Volute of an Aqua-Flo XP2 or FMXP2 Wet...MSRP: $44.99$34.99