Shop

This part is obsolete and there are no replacements for it..  No-Flo Guillotine ValveDesigned to isolate the above-ground pool system to aid in maintenance and service no-flo guillotine-style valves install easily. The valve features a 3/8"...

Toggle SwitchesHeavy duty 20 amp rating

This sensor is no longer available.. Temperature Sensor

Vico/Balboa Ultimax Pump ImpellerClosed face impeller made for the Ultimax spa pump by Vico/Balboa. Rated at 4.0hp, it is used in an Ultimax pump wet end, and must be installed on a 4.0hp (or greater) thru bolt motor. Click the below links for the seals,...

You are buying a 3 HP 48 Frame Waterway Executive 2" X 2" Wet End / Pump complete with Screws, Volute, Impeller, Seal, Face and the Wear Ring. The difference between a 48 or 56 Frame wet end is the spacing of the Motor Thru bolts. The 48 Frame will be 3...

This part is a Wear Ring measures 2 5/8" inside Diameter and fits all Aqua-Flo XP2e and Xp3 Impellers except the 3.0HP Xp2e Impeller... The Odd 3.0HP Impeller requires a different Wear Ring which measures 2 3/8" Inside Diameter.. Look at the chart in...

This is a 115V Center Discharge Aqua-Flo Circulation pump with a 1 1/2" Suction and Pressure side that measures about 2 3/8" Across the threads. Circ-Master pump takes 24-hour filtration to a new level, delivering the highest GPM of any recirculation...

This part is a Filter Cartridge,  7 3/8" Long x 8" Across 4" Hole Master Spa & Down East 2004+. This filter is 7 3/8" long x 8" Wide and it has a top hole that is 4". The overall length of this housing is about 7 3/8". The top hole size is about...

This part is a Large high volume cone shaped bellows Brown in Color... Especially suited for latching air sensors and mechanical sequencing switches. Shipped w/nutMounting hole 7/8" This link is to the same style switch in Beige: Beige, PT1,...

Can be cut into multiple manifolds (2, 4, or 6-ports) utilizes 3/4"&3/8" clear vinyl tubing manifold comes with 2 plugs

This Manifold is  1 1/2" input which measures 1 7/8" Inside Diameter x (4) 1/2" outputs that measure 3/4" Inside Diameter.  Note: These manifolds are new old stock so they will not be perfect aesthetically...   Barb/Port Size 1/2"...