Shop

This part is an European Flow Thru Element, 3.0kW, 10", 115v/230v, use in 15"x 2" Tubes on Balboa M7, Gecko and more..  Heater Application Brett Aqualine, Balboa, Gecko, HydroQuip Heater Element Type Flow Thru, Offset Heater...

Tee, 1" Slip x 1" Slip x 1" Slip.. 1" Slip measures about 1 1/4" Inside Diameter and receives a 1" pipe that measures about 1 1 /4" Outside Diameter.. (PVC) Plastic Pipe Fittings, Sch 40.     PVC Pipe Fitting Type Tee ...

The way you figure out which motor you need is you measure the Width & Height of the motor. Look at the picture for examples of what to measure, the you figuire out what voltage 115V or 230V  and don't guess at the voltage because wiring in the...

This part is a Pump Motor only that is 48 frame 115V 2 speed with 11.0 Amps on High Speed and 2.9A on Low Speed.. You can find wet ends for this motor by clicking here.. Complete Wet Ends Motor Type Spa Motor Amperage 11.0A/2.9A Voltage 115v ...

Dimensions 3-1/4Óx7Ó This TSC-8/K-8 control panel will work with most MSPA systems, has 8 buttons including a filtration cycle button, and will control dual pumps and an air blower. It has an LCD display and comes with a 10ft cord. This topside also...

This part is an Adapter Fitting, 2" Slip x 2" Male Pipe Thread.. This part is used to connect 2" plumbing to swimming pool pumps with threaded 2" connections..  The slip side measures about 2 3/8" ID and the threaded side measures about 2...

This part is a Complete FMHP 1.5HP Aqua-Flo 1 1/2" x 1 1/2" (Which measures about 2 3/8" Across the Threads) Side discharge 48 frame wet end for FMHP pumps. This wet end is used with a 48 frame motor that would have about 9.0 Amps on High Speed on a 230V...

This item is a Gray 2 1/2" Notched Replacement Diverter Cap for a 1" Waterfall or Neck Jet Control.. The inside thread measurement is about 1 5/8" and the center hole is about 3/4".. It uses (2) Small o-rings and one O-Ring Gasket that...