Shop

You are buying a Complete Replacement 4.0KW Heater Assembly that fits a Gecko SSPA or Spa Builders Pack. This Heater Assembly includes the Tub, Element, Pressure Switch, Split nuts and Gaskets. NOTE: If you have the old style SSPA board with the...

Waterway HiFlo Pump ImpellerClosed face impeller made for the HiFlo side discharge pump by Waterway Plastics. Rated at 3.0hp, it is used in a Waterway HiFlo pump wetend, and must be installed on a 3.0hp (or greater) thru bolt motor. Shaft seal sold...

Specifically designed for Residential, Commercial and Industrial applications, the Magic MIP Ball Valves are equipped with EPDM Seats and O-Rings, providing smooth operation and excellent chemical resistance. All Valves comply with ASTM 2467 Standards...

This part is obsolete and there are no replacements for it..  No-Flo Guillotine ValveDesigned to isolate the above-ground pool system to aid in maintenance and service no-flo guillotine-style valves install easily. The valve features a 3/8"...

Toggle SwitchesHeavy duty 20 amp rating

This sensor is no longer available.. Temperature Sensor

Vico/Balboa Ultimax Pump ImpellerClosed face impeller made for the Ultimax spa pump by Vico/Balboa. Rated at 4.0hp, it is used in an Ultimax pump wet end, and must be installed on a 4.0hp (or greater) thru bolt motor. Click the below links for the seals,...

You are buying a 3 HP 48 Frame Waterway Executive 2" X 2" Wet End / Pump complete with Screws, Volute, Impeller, Seal, Face and the Wear Ring. The difference between a 48 or 56 Frame wet end is the spacing of the Motor Thru bolts. The 48 Frame will be 3...

This part is a Wear Ring measures 2 5/8" inside Diameter and fits all Aqua-Flo XP2e and Xp3 Impellers except the 3.0HP Xp2e Impeller... The Odd 3.0HP Impeller requires a different Wear Ring which measures 2 3/8" Inside Diameter.. Look at the chart in...

This is a 115V Center Discharge Aqua-Flo Circulation pump with a 1 1/2" Suction and Pressure side that measures about 2 3/8" Across the threads. Circ-Master pump takes 24-hour filtration to a new level, delivering the highest GPM of any recirculation...

This part is a Filter Cartridge,  7 3/8" Long x 8" Across 4" Hole Master Spa & Down East 2004+. This filter is 7 3/8" long x 8" Wide and it has a top hole that is 4". The overall length of this housing is about 7 3/8". The top hole size is about...