Shop

This part is a Cartridge Filter 8" x 7" Wide 2"mpt 32sqft Master Spa Down East Coleman Maax. This filter is 8" long x 7 " Wide and it has a hole in one end that is 5" with lid and a nipple on the other end that is 2". The overall length of this housing...

You are purchasing a New Balboa 52295 Non M7 Spa Hot Tub Board. Watch the video for more information including some diagnostic tips.. This board does use a pressure switch.   Board is used with an E7 Topside and can run up to two pumps and...

This item is a Rising Dragon Brand LED Single Light Lens... Features a 1" Face Width and the holse size is about 1/2"... Comes with a Lens, O-Ring and Nut.. With the Rising Dragon Pinnacle Light System, there is no complicated cabling or hub layouts...

This part is a Manifold, 3/4" Slip, 6 Port, Transition, 2" Slip..   Barb/Port Size 3/4" Number of Ports 6 Manifold Fitting Type Transition Manifold Plumbing Size "A" 2" Manifold Plumbing Type "A" Slip (s)  

This part is a Complete Jet Internal, Pentair,  Cyclone,  5" face diameter, Directional, 5 Scallop, Silver.. This will replace Sundance Intelli-Jet LX, 1999-2002   Installation Type Twist Lock Face Diameter 5" Jet Part Type Internal...

This part is a 3.0HP Power-Right Pump Impeller that would be found on a motor with about 12.0 Amps at 230V.. Closed face impeller made for the Power-Right 3.0ohp/6.0thp spa pump. Rated at 3.0hp, it is used in the Power-Right 9089X, 9094X, 9121X, PRC504...

This part is a Heater Tailpiece, 2 1/2"mbt x 2" Slip.. The threaded side measures about 3 5/8" edge to edge and the Slip side measures about 2 3/8" Inside Diameter..  For the gasket that works with this Union click this Link: 2 1/2" Spa Hot Tub...

Jet Body, Pentair Euro, Air 3/8" barb x Water 3/4" barb, Ell Style Fittings for this body: Jet Intrnl, BWG/Pent Euro, 1-1/2"fd,Swirl,w/Wall Fitting,Wht Jet Intrnl ,BWG/Pent Euro, 1-1/2"fd,Fixed,w/Wall Fitting,Wht Jet Intrnl, BWG/Pent Euro,...

This part is a Black Water Control Valve normally used for a Waterfall or Neck Jet Control, it is a full On/Off Valve made by Waterway, the plumbing connects are 1" Slip x 1" Slip Single Port.. To connect the valve to 1" plumbing simply glue inside of...