Shop

This part is a Water Manifold, 3/4" barb, 2 Port, Dead End, 2" Slip Barb/Port Size 3/4" Barb Port Type Barb (b) Number of Ports 2 Manifold Fitting Type Dead End Manifold Plumbing Size "A" 2" Manifold Plumbing Type "A" Slip (s) Manifold...

Leisure BayStainless steel, 17-1/2" x 3" 4.0kW/230v replacement heat exchanger. Made for use exclusively on Leisure Bay hot tubs. The original heater may have used a redundant hi-limit, if that is the case when replacing with this heater simply protect...

This part is a Pump Face for a Vico Ultima Side Discharge wet end that is 2" which measures about 3" edge to edge across the threads.. The Seal Kits for this pump can be found here: Vico Seals 201 The other parts for this pump can be found here: Ultima...

This part is a Complete FMHP 1.0HP Aqua-Flo 1 1/2" x 1 1/2" (Which measures about 2 3/8" Across the Threads) Side discharge 48 frame wet end for FMHP pumps. This wet end is used with a 48 frame motor that would have about 8.0 Amps on High Speed on a 230V...

This Waterway 2.0hp Ex2 Pump is 230v, 2-spd, 48fr, 9.0A, 2"x 2" and it is a perfect XP2 Replacement.. This is Waterways answer to an Xp2 pump.. IMPORTANT MOTOR VARIATION NOTICE Due to ongoing changes in the hot tub pump industry since COVID, motor...

This part is a Complete Jet Internal, CMP, Typhoon 400, 4" face diameter, Twin Roto, 5 Scallop, Stainless Steel, Gray... NOTE: Cmp Jets do not offer a Replacement Diffuser for this Jet.. Installation Type Snap In Face Diameter 4" Jet Part Type...

Manifold/Barb Fitting

This part is a Hard to get Power Storm Jet Body That I do have some stock on.. This jet body receives 5" diameter face dimension... Hole Size    3-3/4"Air Connection Size    3/8"Jet Part Type    BodyAir...

// As Of 08-24-2021 We have these in stock ready to ship..    Pump, Circulation, Aqua-Flo CMHP, 1/15hp, 230v, 1-1/2" Side Discharge   This 230V Laing E-14 circulation pump is compact and lightweight, less than 5 lbs. The E14...

You are buying a 1" FTB X 3/4" Barb Pump Union with O-ring that matches the Union.The Union receives a 3/4" Inside Diameter Hose which measures about 1" on the outside and then Screws to a 1" Wetend (Pump) Threaded Part on the other side the threads will...

This part is a Balboa, E7, (7) Button, Topside, Standard Digital, (2) Pump & Blower, Light...This panel replaces all Serial Standard Digital products. It also utilizes the Cat 5 phone type connector. Other Overlays: Overlay Balboa Topside 7 Button...

Poly Jet Series3/8"sb air x 3/4"sb water ell bodyHole size required is 2-5/8"