Plumbing and Related Parts

This Kit is a 1-1/2" Manifold Coupler Kit for 1-2 Manifolds. The Kit consists of (1) 1 1/2" Coupler, 1 1/2"Slip X 1 1/2"Slip (6") of 1 1/2" Flex Pipe, (1) 1/4 Pint of Christy's Red Hot Blue Glue and (1) 1/4 Pint of Christy's Purple Primer. The kit...

This Kit is a 1 1/2" Coupler and a 6" Piece of 1 1/2" Flex Pipe used when gluing new plumbing to old plumbing. We call this Technique "Spin it To Win it" Meaning you spin the coupler onto the old plumbing when you are gluing new to old and then purple...

"Magicmend" Pipe extenderSimply cut the bad fitting and remove it from the system. Glue the correct size Magicmend into place and replumb your new fitting  

You are buying on a 2" Slip X 2" Barb Adapter.. This adapter glues inside of a 2" PVC plumbing fitting and a 2" Inside Diameter Tube glues onto the barb..  This part is found in Strong Spas and some others I will list them as I find out...

You are buying an Air Bleeder Mountable Bleeder Fitting with a removable plug, a 1/4" Mpt X 3/8" Barb plug. This style set up is is usually found in Dimension One Hot Tubs in the Filter area and other brands as well.. Note; The plug is not sold...

This item is a Gray Complete Suction Fitting that requires a 3 3/8" hole... The cover is 5 3/16" Wide... The plumbing size is 2" which would measure about 2 3/8" Outside Diameter of the pipe that glues in.. If your plumbing is 1 1/2" you would need a 2"...

This part is a Complete CMP Bottom Drain Suction that is VGB Comaptible and requires a 3 5/16" Hole..  Suction Fitting Complete    Complete Assembly, StraightHole Size    3-5/16"Cover Diameter  ...

Manifold Wye Full Description Features: 22.5 degree wye 1 inch slip X 1 inch slip X 1 inch slip The slip fitting on this part would measure about 1 1/4" Inside Diameter on each opening.. Improves performance Available in two different...

You are buying a (1) 45° 1 1/2" Slip X 1 1/2"Slip PVC Plumbing Fitting. The 45° ELL receives a 1 1/2" fitting on each side which would measure 1 7/8" Inside Diameter. Any 2"  fitting (which measures 1 7/8" outside diameter) will glue into...

This item is a (4) Way Barbed Coupling used to couple 3/8" ID hose together. 3/8 Inch Barb X 3/8 Inch Barb through and a tee Barb Coupling 3/8" barb and 3/8" barb... This part is used on pump bleeder systems many time where the bleeders are attached...

See the Informational videos here first. You are buying (4) 2" Spigot X Dead End X (6) 3/4" Barbs manifold, (4) 3/4" Plugs, 6" of 2" Flex and a Coupler Basic Replacement Kit. The Kit consists of (3) Manifolds with (24) 3/4" Barbs, a 2"...

This part is a Replacement Bottom Drain Fitting Kit found on Artesian and Resort Hot Tubs. Remove the cracked inside the floor top Fitting and replace with this one by adding the screwing the new face into place. Although this is a complete kit including...