Plumbing and Related Parts

This part is a 90 degree slide on glue in style 1" slip adapter fitting. This fitting slides onto a 1" air control valve before you glue any plumbing to the bottom of the valve and then it gives you a 1" slip fitting on the side in a 90 degree fashion....

This Kit is a Barb Adapter 3/4" Renu Extension Kit that features (2) Clamps, 4" 3/4" ID Tubing and (1) 3/4" Barb to 3/4" Slip /1" Street Fitting that will glue between a 3/4" barb used to add another 3/4" water outlet to a 1/2', 3/4" or 1" piece of...

This item is a 1/8" MPT Plastic Plug which can be used to block an 1/8" MPT (male Pipe Thread) hole normally found on a Heater Tube on Hot Tubs. This hole size is the same size as a Pressure Switch hole and would measure about 3/8" wide across the hole...

This Kit is a 3/8" Tubing Connection Kit for 3/8" Plumbing repairs where you are connecting old 3/8" Clear Tubing that measures about 1/2" OD between a cut air control line and the 3/8" Barb on an Air Manifold or Jet Body Air connection.. The kit...

This part is a 1/2" Spin To Win Kit for 1/2" Plumbing repairs where you are connecting old 1/2" Plumbing that measures about 3/4" OD to new plumbing.. The kit includes a 6" Piece of 1/2" Flex Pipe that measures about 3/4" OD and a 1/2" Coupler.. This...

This part is a Straight 2 1/2" Slip X 2" Slip Assembly that it is a used with a 5" Suction Wall fitting that has a 2 1/2" Slip Hole... This fitting works with this Gray Suction fitting: Suction Assembly, Waterway, 5" Ultra Flo, 3-1/4" Hole Size, 2-1/2"...

This part is an Air Bleeder barbed plug and O-Ring for Jacuzzi and Sundance Piranah Pump Faces Only.. Hot Tub Pump Faces to bleed the air off the pump while filling the tub up.  This barb is usually replaced because the barb is broken off and...

This part is (1) 1/8"x 1/8" X 1/8" Barbed Tee In-line Air Bleed that fits 1/8" OD , 3/16" ID Clear Hose on each side. These Will prevent very sensitive air switches from randomly activating due to thermal expansion of air and water vapor..  

This part is a VGB Compliant Suction 90 Degree Sweep Elbow Assembly made by Waterway it is a used with a 5" Suction Wall fitting that has a 2 1/2" Slip Hole... This fitting accepts a 3/4" tube on a the barb fitting and a 2" pipe which would measure about...

This part is a VGB Compliant Suction Assembly made by Waterway it is a 5" Ultra Flo, 3-1/4" Hole Size, 2-1/2" Slip, Gray... Virginia Graeme Baker Compliant Flow rate = 264 gpm (portable spas only) Face size 5" Hole size 3-1/4" The 90 Sweep with a...

This part is a Gasket to fit a Waterway Hi-Flo Suction Return Wall fitting with a 2 1/2" Hole Size and a 1 1/2" Slip plumbing fitting.. See a link below for that Suction fitting this and other parts this gasket fits: Suction, Return, Wall Fitting,...

This part is a Nut to fit a Waterway Hi-Flo Suction Return Wall fitting with a 2 1/2" Hole Size and a 1 1/2" Slip plumbing fitting..  See a link below for that Suction fitting this nut fits: Suction, Return, Wall Fitting, Waterway, 3-1/2" Hi-Flo,...