Hot Tub Parts by Tub Brand

This Pump is a Watkins 0974001 Wavemaster 6500 48Frame 230V 2 Speed with a 1.5 HP Wet End that features a 2" x 2" inlet and outlet Wet End that measures about 3" across the threads...  High speed Amperage is 7.7 and low speed is 2.2 Amps....

This complete pump and motor is a Watkins Wavemaster replacement, 1431701-01, 115V (2) Speed 48 frame 2" x 2" pump and motor... The 2" inlet and outlet measure about 3" across the threads... Keep in mind if you choose this high amperage pump and have a...

This part is a Kit that features (2) Seal, (1) Bearing, Seal Tool and Silicon that fit a Watkins, Piranha, Vendor Code 0302, 1.65hp, Wavemaster. To Install you should put silicone sealant on the back of the Metal part and gently push it into place. Also...

This part is a Kit that features (1) Seal, (1) Bearing, Seal Tool and Silicon that fit a Watkins, Piranha, Vendor Code 0302, 1.65hp, Wavemaster. To Install you should put silicone sealant on the back of the Metal part and gently push it into place. Also...

This part is a Kit that features (1) Seal, Seal Tool and Silicon that fit Pump Seal Kit with Silicon , that fits a Watkins, Vico, Vendor Code 0302, 1.65hp, Wavemaster To Install you should put silicone sealant on the back of the Metal part and gently...

This parts is a Watkins, 36675, Vendor Code 0302, 1.65HP Impeller, Wavemaster 7000 Click here for the Seal for this impeller Vico Seal Options Impeller Type Closed Face Impeller Diameter OD 3-13/16" Vane Width ID 1/2" Eye Diameter OD 2-1/4" ...

This part is a 15" Heater Tube with a 4.0KW Heater in it that is found in some Sundance 680 Series tubs and some Sweetwater & Del Sol tubs as well with a High Flow .. For other parts related to this heater Click the links: Pressure Switch 1/8" mpt 1...

This part is a 15" Heater Tube with a 5.5KW Heater in it that is found in some Sundance680 Series Tubs and some Sweetwater tubs as well with a High Flow .. For other parts related to this heater Click the links: Pressure Switch 1/8" mpt 1 Amp Hot Tub Spa...

This part is a 2 Terminal 50Amp Power Block found on many Control pack and board set ups..

This part is a Spaside Control for a Jacuzzi J-300 Series hot tub with an Oval 4-Button LED.. The button configuration is Up-Down-Light-Pump1 Jacuzzi topside LED control panel used on 1 pump J-200 models from 2005-2006 and J-300 models from 2002 to...

This pump is an Aqua-Flo Tub-Master Energy Efficient Bath Pump 10.0 amps 115 Volts w/Air Switch The Plumbing connections are 1 1/2" on the Pressure and Suction sides which measure about 2 3/8" across the threads.. Note: The Tub-Master line of pumps have...

This part is a PC Board, Balboa, CS6200, Cal Spa Board, 6200DV..   Circuit Board Application    Balboa Water GroupCircuit Board Model    VS501ZCircuit Board Type    New This circuit board also replaces...