Hot Tub Parts by Tub Brand

This part is a Base Mounting Bracket, Pump, LX, Sundance, Jacuzzi, 56 Frame found in some Sundance or Jacuzzi Hot Tubs.For the pumps that are used with this bracket click these links: 56Fr Jacuzzi® Sundance Intertek Baseless Pump 2" X 2" 2...

This part is a (1) Speed 56 Frame Complete Intertek Pump that fits Jacuzzi Premium or Sundance brand Hot Tubs that have a band style base mount. These pumps usually have the part number WUA-400-I, and then 6500-352 or 6500-363 or 6500-365 on the label...

Watkins Vendor Code 4081 Wavemaster, 4000, 6000, 7000, 8000, 8200, 9000, 9200... 48Frame Pump Face O-Ring Only fits around the Face of this Pump Face...  

This Part is a 2 1/8" wear ring that is used between the impeller and the wet end face on Watkins Vendor Code # 4081, Wavemaster, 4000, 6000, 7000, 8000, 8200, 9000, 9200.. This wear ring serves as a seal between the suction and pressure sides of the...

  This is a 1HP Seal & Impeller Kit for a Watkins 37334 Vendor Code# 4081 Pump with a 2 1/8" Eye with 1/4" Vane Width and 3 7/8" OD for an Wavemaster 48 1.0HP Motor would be about 7-8.0 Amps on high speed at 230V or 11-12.0 Amps at...

This complete pump and motor is a Watkins Wavemaster 7000, 8000 or 9000 replacement, 39577 Code 06290, 115V or 230V, (1) Speed, 20.0Amp or 10.0Amp, 48 frame 2" x 2" XP2 pump and motor... The 2" inlet and outlet measure about 3" across the threads... Keep...

This part is a Replacement Watkins Water Check Valve that is 3/4"Barb x 3/4" Barb with Connect kit..  This kit is used to make the connection to existing 1/2" Flex pipe which measures about 3/4" outside diameter.. You slide the 1/2" flex into the...

// This part is a (2) Speed 56 Frame Complete Intertek Pump that fits Jacuzzi Premium or Sundance brand Hot Tubs that have a band style base mount. These pumps usually have the part number WUA-400-II, and then 6500-367 or 6500-365 or 6500-363 on...

This Part is a Wet End O-Ring for a 48 or 56 Frame Face Plate for a Jacuzzi Premium or Sundance WUA400 6500 Intertek LX Brand Pump Wet End only.. Watch the video for instruction on how to install this part and also how to determine if this...

This Parts is a NON-Standard 2" Heater or Pump Union O-Ring that measures 2 5/8" Center to Center. The O-Ring is 2 5/8" center to center and fits some unions but most unions are 2 1/2" center to center... Do not buy this O-Ring until you...

Balboa Water GroupStainless steel replacement heater assembly, 5.5kW/230v, 2" x 15". Includes a pressure switch, Hi Limit Sensor on the right side. Made for Balboa Value and Balboa LE control systems. Housing Configuration  ...

This part is a 8" Master Spa Twilight Series DSG Jet. This Jet is 8" across the Face it depends on how you measure it. It features 14 black nozzles and chrome. Adjustable Master Massage Jet Assembly with L Gasket DSG Stainless Steel... The Water...