1 1/2" Aqua-Flo Wet Ends FMCP FMHP FMVP TMCP
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Wear Ring, fits AquaFlo, FMHP, FMCP, TMCP, pump impellers, 1 3/4" hole
HTPOFAmerica
MSRP: $10.99$8.99This part is a replacement wear ring found in 48 frame 1 1/2" Flo-Master "FMHP" Series Side Discharge and "FMCP" Center Discharge Spa Pumps.. The ring measures about 1 3/4" inside the wear ring and 2 3/16" at the widest part and about 3/4" tall.. ...MSRP: $10.99$8.99 -
Impeller, Aqua-Flo, FMHP, FMCP, TMCP, FMVP, 0.75HP
HTPOFAmerica
MSRP: $44.99$34.99This is a .75HP or 3/4HP Impeller for an Aqua-Flo 48 Frame Side or Center Discharge FMHP, FMCP, FMVP, and TMCP Series Wet End .75HP Motor that has about 7.0 Amps on High Speed at 230V and 7-8.0 Amps at 115V. This Impeller fits between the Face and the...MSRP: $44.99$34.99 -
Impeller, Aqua-Flo, FMHP 1 1/2" Side, FMHP, FMCP, TMCP, FMVP, 2.0HP, 91693701
HTPOFAmerica
MSRP: $44.99$34.99This is a 2HP Impeller for an Aqua-Flo 48 Frame Side or Center Discharge FMHP, FMCP, FMVP, and TMCP Series Wet End 2HP Motor that has about 10.0 Amps on High Speed. This Impeller fits between the Face and the Volute of an Aqua-Flo FMHP, FMCP, FMVP, and...MSRP: $44.99$34.99 -
Union Adapter, 2" Threaded Outside x 1-1/2" Threaded Inside, w/O-Ring
Aquaflo/Gecko
MSRP: $17.63$13.99Standard Pump Union Adapter Assembly With this adapter you can convert a 2" Threaded Pump Union whcih measures about 3" I.D. to a 1 1/2" threaded fitting which = 1 7/8" O.D. standard wet end. An O-Ring does come with this fitting but if you just needed...MSRP: $17.63$13.99 -
Drain Plug Adapter, Gecko, AquaFlo XP2, XP2E, 1/4" Barb x 1/4"Mpt, Bleeder, Watkins
HTPOFAmerica
MSRP: $13.99$9.99This part is a Pump Bleeder Barb with O-Ring that is found on some Aqua-Flo Xp2 and Xp2e wet ends but is used with an unusual bleeder line.. The line is 1/4" Inside Diameter not 3/8" Inside Diameter like most bleeder lines.. This part does come with the...MSRP: $13.99$9.99 -
Impeller, Aqua-Flo FMHP, FMCP, TMCP, FMVP, 1.5HP
HTPOFAmerica
MSRP: $44.99$34.99This is a 1.5HP Impeller for an Aqua-Flo 48 Frame Side or Center Discharge FMHP, FMCP, FMVP, and TMCP Series Wet End 1.5HP Motor that has about 9.0 Amps on High Speed at 230V and 14.0 Amps at 115V. This Impeller fits between the Face and the Volute of...MSRP: $44.99$34.99 -
Impeller, Aqua-Flo, FMHP, FMCP, TMCP, FMVP, 1.0HP
HTPOFAmerica
MSRP: $44.99$34.99This is a 1HP Impeller for an Aqua-Flo 48 Frame Side or Center Discharge FMHP, FMCP, FMVP, and TMCP Series Wet End 1HP Motor that has about 8.0 Amps on High Speed. This Impeller fits between the Face and the Volute of an Aqua-Flo FMHP, FMCP, FMVP, and...MSRP: $44.99$34.99 -
Set of (2) Hot Tub Spa 1 1/2" Slip X 1 1/2" Pump Union with Gasket
HTPOFAmerica
MSRP: $21.99$18.49You are buying a Set of (2) 1 1/2" Slip X 1 1/2" Pump Unions with Gasket or Oring that matches Unions. The Union recieves a 1 1/2" pipe or fitting on one side and then Screws to a 1 1/2" Wetend(Pump) Threaded Part on the other side. It will Glue to a 1...MSRP: $21.99$18.49 -
Pump Seal (Better) PS-3867 Viton Like a PS-200 Fits Most Aqua-Flo Wet Ends, Salt/Ozone
HTPOFAmerica
MSRP: $28.99$18.99This Seal is a Salt/Ozone resistant PS-3867 which is the Better - Viton Carbon Graphite version of the PS-200 Seal used Primarily in Aqua-Flo Wet Ends and Waterway "Viper" Wet Ends. It is 1 1/4" Across the back of the Spring Seal part that goes onto...MSRP: $28.99$18.99 -
Split Nut, Pump, Union, Emergency Repair, 1 1/2" Threaded Only for Pumps
HTPOFAmerica
MSRP: $13.99$10.99This part is a 1 1/2" Pump Union Split Nut Repair Kit which includes the split nut and (2) Screws for use with a 1 1/2" Pump Union. The Pump Union Split Nut that measures about 2 7/8" on the outside and mounts to the existing Pump Union Body using 2...MSRP: $13.99$10.99 -
Hot Tub Spa 1 1/2" Slip X 1 1/2" Pump Union with Gasket Video How To
HTPOFAmerica
MSRP: $12.99$9.99This part is a 1 1/2" Slip X 1 1/2" Pump Union with Gasket or Oring that matches Union. The Union receives a 1 1/2" pipe or fitting on one side and then Screws to a 1 1/2" Wet end(Pump) Threaded Part on the...MSRP: $12.99$9.99 -
1 1/2", Gasket, Heater or Pump, Union, with 1 7/8" Groove How to Video, 1-1/2"
HTPOFAmerica
MSRP: $7.99$4.99NOTE: This gasket does not fit your Coleman SALUSPA DO NOT order it.. Click this link to see Saluspa Gaskets.. Saluspa This part is a Standard 1 1/2" Heater or Pump Union Gasket. The gasket is 2 3/8" across and fits unions that have a 1...MSRP: $7.99$4.99