Shop

MDA Series Slo Blo FuseCeramic construction for protection of loads to 30 amps

You are Buying a Black Smooth 3 5/8" Spa Diverter Cap only. This is a NON  Buttress Cap if your cap has the word Buttress stamped in it look in our store for a Buttress cap. This Diverter Cap mounts on top of the Diverter Valve with...

Balboa Water GroupStainless steel replacement complete heater assembly, 5.5kW, 230v or 115V.Thie heater measures 2" Inside Diameter of the tube and the length of the tube is 15". Includes M7 sensors, tailpieces, split-nuts and gaskets. Made for Balboa VS...

This parts is an Executive 2" Threaded Face plate assembly (Which will measure about 3" Across the Threads) less the O-rings, Screws, Bleeder Plugs and other hardware needed to attach it to the volute..There is another version of the face with a 2 1/2"...

This Listing is for a Waterway Executive 16.4 Amp 56fr 2 Speed 230V 5 HP 2" X 2" Pump. Your sticker may say 5-6HP. This unit features a 2" X 2" Executive Wet End that can be moved from the 12 O'clock position to the 3, 6, or 9 O'clock position and a...

This item is a 1/8" MPT Plug which can be used to block an 1/8" MPT (male Pipe Thread) hole normally found on a Heater Tube on Hot Tubs. This hole size is the same size as a Pressure Switch hole and would measure about 3/8" wide across the hole or the...

Start Capacitor1-7/16"dia x 2-3/4"hgt

You are buying an anti-microbial replacement filter for Eco-Pur applications in 2002+ Master Spas and Down East Spas. This filter is found on the inside of a larger filter and usues the stalk system with a center stalk and a threaded cap. You can find...

You are buying on a 1" Slip X 1" Street X 1" Street Tee X (8) 3/8" Barbs Air Manifold. The Manifold recieves a 1" pipe on one side and then slips into a 1" fitting on the other side and /or the top with (8)...

This part is a Stainless steel aftermarket replacement heater assembly that fits systems using a pressure switch positioned 90 degrees from the heater terminals. 5.5kW/230v with 1/8"npt pressure switch tap. 2" x 15" manifold includes 2"mbt nuts and 2"s...