Shop

This Pump is a 48Frame 230V 2 Speed with a 3.0 HP Wet End that features a 2" x 2" inlet and outlet Wet End that measures about 3" across the threads...  High speed Amperage is 13.1 and low speed is 3.3 Amps.. Note: This pump and motor come without...

This filter is 8" tall x 4 1/4" Wide with a 1 15/16" Hole in the top and bottom. it is 5 SQ Ft. Diameter 4-1/4" Length 8" Top Style Open Top Physical Dimension 1-15/16" Bottom Style Open Bottom Physical Dimension 1-15/16" Application Aqua...

12-port manifold with 3/8" barbs and 1"s x 1"spg inlet/outlet

This part is a complete 1" Air Control Gray..  Top access air Control. Hole size 1-5/8" Plumbing Size    1"Hole Size    1-5/8"Face Diameter    2-3/4"Face Style    NotchedColor  ...

This Kit is a Barb Adapter, 3/4" Barb x 2" Spigot to 3/4" Slip Kit, Fits 2" Slip Water Manifolds that features (2) Clamps, 4" 3/4" ID Tubing and (1) 3/4" Barb to 3/4" Slip /1" Street Fitting that will glue inside of a 2" Slip Manifold or other 2"...

This part is an Aqua-Flo XP2 Impeller for a 3.0HP Motor which would have an Amperage Rating of about 12.0Amps on High Speed at 230V and Not applicable 115V Pumps... It will also be a 56Frame motor which would have a 5/16" head on the through bolts... If...

This part is an Aqua-Flo XP2 Impeller for a 2.5HP Motor which would have an Amperage Rating of about 11.0Amps on High Speed at 230V and is Not Applicable for 115V Pumps... It will also be a 56Frame motor which would have a 5/16" head on the through...

This filter fits Jacuzzi Premium Hot Tubs J-300, J-400 Series. It is 15 1/2" Tall and 6 5/8" Around and Features a 2" SAE which is a Thick Thread and measures a hair less than 2" Inside diameter and measures 2 3/8" to the outside of the threads. There...

This Kit is an 2HP Impeller for an Executive 48 Frame Wet End up to 2HP Motor and a 56 Frame Wet End 2 HP Motor. This Impeller fits between the Face and the Volute of an Executive Wet End. I would advise replacing the Seal when you...

This part is a G&G Suction cover that measures about 4 7/8" edge to edge.. It has a single hole in the center and comes with a stainless screw to hold it into place..Cover Diameter    4-7/8"Suction Fitting Part Type  ...