Shop

This parts is an Executive 2" Threaded Face plate assembly (Which will measure about 3" Across the Threads) less the O-rings, Screws, Bleeder Plugs and other hardware needed to attach it to the volute..There is another version of the face with a 2 1/2"...

This Listing is for a Waterway Executive 16.4 Amp 56fr 2 Speed 230V 5 HP 2" X 2" Pump. Your sticker may say 5-6HP. This unit features a 2" X 2" Executive Wet End that can be moved from the 12 O'clock position to the 3, 6, or 9 O'clock position and a...

This item is a 1/8" MPT Plug which can be used to block an 1/8" MPT (male Pipe Thread) hole normally found on a Heater Tube on Hot Tubs. This hole size is the same size as a Pressure Switch hole and would measure about 3/8" wide across the hole or the...

Start Capacitor1-7/16"dia x 2-3/4"hgt

You are buying an anti-microbial replacement filter for Eco-Pur applications in 2002+ Master Spas and Down East Spas. This filter is found on the inside of a larger filter and usues the stalk system with a center stalk and a threaded cap. You can find...

You are buying on a 1" Slip X 1" Street X 1" Street Tee X (8) 3/8" Barbs Air Manifold. The Manifold recieves a 1" pipe on one side and then slips into a 1" fitting on the other side and /or the top with (8)...

This part is a Stainless steel aftermarket replacement heater assembly that fits systems using a pressure switch positioned 90 degrees from the heater terminals. 5.5kW/230v with 1/8"npt pressure switch tap. 2" x 15" manifold includes 2"mbt nuts and 2"s...

This part is a Impeller, Jacuzzi, J Pump, 1.0hp, 48FR, J Series, JCM Series, K Series, KM Series.. This is found on a Wet End that has a face like I show in the Photo Section only..  Impeller Type Closed Face Impeller Diameter...

Temp/Hi Limit Sensor Assembly