Shop

This part is a Retaining Ring for a HydroAir Duo Blaster Roto Jet system.. It is Gray.. This jet has other parts the can be found in the below links and are sold separately: Retaining Ring, HydroAir, Duo Blaster, Roto, Gray, For 1 3/4" Face Flow Path,...

For a video about this part search YouTube for: Hot Tub Spa Parts Heater Union 2" X 1 1/2" Slip Information The Hot Tub Professor   You are buying a 1 1/2" Slip X 2" Heater Union Only...

This part is a Complete Jet Internal, Waterway, Poly Jet, 3-3/8" face diameter, Adjustable, Deluxe Scalloped, White, Threaded... This jet is threaded and the way you remove it is use a flat screw driver and carefully start pulling the edge of the...

This 230V Laing E-10 pump 50/60 Hz with a 3/4" Barb Suction and Pressure Side which measures about 3/4" Outside Diameter and the hose is 3/4" Inside Diamater  is compact and lightweight, less than 5 lbs. It is whisper quiet, highly efficient and...

This part is a Complete Jet Internal, Pentair, Cyclone Micro, 3" face diameter, Roto, Textured, Scallop, Gray...   Installation Type Twist Lock Face Diameter 3" Jet Part Type Internal Diffuser Opening Type 2 Nozzle Diameter 9/16" Base...

This item is a 2 1/8" wear ring that is used between the impeller and the wet end face on Aqua-Flo XP or XP2 Pumps. This wear ring is for all Horse Powers on 48 or 56 frame XP2 Wet Ends. This wear ring serves as a seal between the suction and pressure...

This item is a 2 5/8" White Smooth Single eyeball Jet fitting that is used in Garden Bath Tubs. This jet features 1 1/4" Threads that screw into a wall fitting on a bathtub. Face Diameter 2-5/8", 2-1/2" Base Diameter 1-1/4" w/Threads Total Length 1/2"...

This is a 1.5HP Impeller with a 2 1/8" Eye Width and a 5/16" Vane Width and 4" OD for an Aqua-Flo 48 or 56 Frame Wet End 1.5HP Motor that has about 9.0 Amps at 230V. This Impeller fits between the Face and the Volute of an Aqua-Flo XP2 or FMXP2 Wet End...

This item is a slice valve stem lock keeper to stop 2" Magic Plastics Slice Gate Valves from vibrating shut. Note: This lock will not work on all brands of slice valves because the stem is different lengths on other brands but will work on most.

This part is a 4 pin female side Amp connector 20 Amp . This part is normally found on the control pack side mounted for the male amp cord that would come from a pump or blower or other accessory. Note: You will need a pin tool to replace this part to...