Pumps and Related Parts

This pump is no longer available.. For the closest pump to replace this click this link: This part is a 115V Center Discharge G&G Olympian Circulation Pump with a 1 1/2" Suction and Pressure side that measures about 2 3/8" Across the threads. This...

This circulation pump is found from the factory in many hot tubs and will be an easy installation for people who are handy.   This pump is a 48 frame 115V or 230V Side Discharge wet end with a 1 1/2" suction side and 1 1/2" pressure side which...

This is a 3.0HP Seal and Impeller Kit.. The Impeller has a 2 1/8" Eye width and 7/16" Vane width and 4 3/8" OD for an Aqua-Flo 48 or 56 Frame Wet End 3.0HP Motor would be about 12.0 Amps on high speed at 230V.. This Impeller fits between the Face and...

This is a 2.5HP Seal, (2) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width and 3/8" Vane width and 4 3/8" OD for an Aqua-Flo 48 or 56 Frame Wet End 2.5HP Motor would be about 11.0 Amps on high speed at 230V.. This Impeller fits between the...

This is a 2.5HP Seal, (1) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width and 3/8" Vane width and 4 3/8" OD for an Aqua-Flo 48 or 56 Frame Wet End 2.5HP Motor would be about 11.0 Amps on high speed at 230V.. This Impeller fits between the...

This is a 3HP Seal, (2) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width and 7/16" Vane width and 4 3/8" OD for an Aqua-Flo 48 or 56 Frame Wet End 3.0HP Motor would be about 12.0 Amps on high speed at 230V.. This Impeller fits between the...

This is a 3HP Seal, (1) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width and 7/16" Vane width and 4 3/8" OD for an Aqua-Flo 48 or 56 Frame Wet End 3.0HP Motor would be about 12.0 Amps on high speed at 230V.. This Impeller fits between the...

This is a Watkins Wavemaster 9000 or 9200 2.5HP Seal Kit & Impeller with a 2 1/8" Eye Width. This Impeller fits between the Face and the Volute of a XP2 Wet End found on some Watkins Hot Spring Caldera pumps with Vendor Code 4081. ...

This Part is a Bath Pump Seal for a LX, DH1.0 Series Guangdong Bath Garden Tub Pump Only. It is 1 3/16" Across the back of the Spring Seal part that goes onto the back of the impeller with a hole size of about 5/8"..  The Ceramic & Rubber part...

This part is a Kit that features (1) Seal, (2) Bearings, Seal Tool and Silicon that fit (4) Mount Style Piranha, Thera-Flo, Thera-Max pumps and The Professor's Silly Juice to seal the seal. It is 1 3/8" Across the back of the Spring Seal part that goes...

This part is a Kit that features (1) Seal, (1) Bearing, Seal Tool and Silicon that fit (4) Mount Style Piranha, Thera-Flo, Thera-Max pumps and The Professor's Silly Juice to seal the seal. It is 1 3/8" Across the back of the Spring Seal part that goes...

This part is a Kit that features (1) Seal, Seal Tool and Silicon that fit (4) Mount Style Piranha, Thera-Flo, Thera-Max pumps and The Professor's Silly Juice to seal the seal. It is 1 3/8" Across the back of the Spring Seal part that goes onto the...