Pump Wet Ends and Related Parts

This part is an Air Bleeder barbed plug and O-Ring for Jacuzzi and Sundance Piranah Pump Faces Only.. Hot Tub Pump Faces to bleed the air off the pump while filling the tub up.  This barb is usually replaced because the barb is broken off and...

This Part is a Volute Back with 4 mounts only for a Piranha Ther-Flo, Thera-Max  pump only. This Part is used mostly in Jacuzzi® and Sundance® hot tubs with this specific type of wet end and will not fit others. Note: There are two different...

This Part is a Set of * Face Plate Screws for Piranha, Thera-Flo or Thera-Max pump faces only. This Part is used mostly in Jacuzzi® and Sundance® hot tubs with this specific type of wet end and will not fit others. For other parts related to this...

This Part is a Volute Back with 8 mounts only for a Piranha Bracketless pump only. This Part is used mostly in Jacuzzi® and Sundance® hot tubs with this specific type of wet end and will not fit others. Note: There are two different versions of...

This part is a Power Right Wet End Pump Face O-Ring Only fits around the Face of a Power Right Pump Face Generally found on Cal Spaa which has 2" inlet and outlet which measures about 3" across the threads...   Related Parts: Impeller, Power-Right,...

NOTE: There are 48 and 56 Frame verison of these wet ends so be sure you check yours before ordering.. The difference is the position of the thru bolts of the motor and the size of the motor it mounts to.. The 48 Frame version measures 3 5/8" in a...

NOTE: There are 48 and 56 Frame verison of these wet ends so be sure you check yours before ordering.. The difference is the position of the thru bolts of the motor and the size of the motor it mounts to.. The 48 Frame version measures 3 5/8" in a...

NOTE: There are 48 and 56 Frame verison of these wet ends so be sure you check yours before ordering.. The difference is the position of the thru bolts of the motor and the size of the motor it mounts to.. The 48 Frame version measures 3 5/8" in a...

Vico Ultimax Pump ImpellerClosed face impeller made for the Ultimax spa pump by Vico. Rated at 1.5hp,which would be 8-9.0 Amps.. it is used in an Ultimax pump wet end, and must be installed on a 1.5hp (or greater) thru bolt motor.  Click here for...

This part is a 2.5HP Impeller that fits some Piranha Wet Ends found on Sundance, Jacuzzi and other brand Hot Tubs.. Click Here for Seal and Other Part options for this impeller: (8) Mount Parts Impeller Type Closed Face Impeller Diameter OD 4-1/4" ...

This part is an Jacuzzi J Pump Face O-Ring.. It measures about 1 15/16" ID and 2 7/16" to the outermost OD..  Part Type O-Ring  O Reference Number O-150 Inside Diameter 5-1/2"id Cross Section 3/16" Application...

This Kit is features a 5HP Impeller, (2) Standard Bearings and 1000 Seal with Silicon and a Seal Install Tool that fits an Executive 48 Frame Wet End up to 5HP Motor and a 56 Frame Wet End 5HP Motor. This Impeller fits between the...