Description
This Parts is a Kit that consists of (2) 1 1/2" Spigot X 1 1/2" Slip Slice Gate Valves and (2) 1 1/2" Pump Unions with Gasket or O-Ring that matches Unions. The Valve receives a 1 1/2" pipe or fitting that would measure about 1 7/8" on one side and then slips inside of a 1 1/2" fitting on the other side that would measure about 1 7/8" ID. It will slip inside of the pump union and glue and screw to a 1 1/2" pump fitting. Don't be confused we also offer a slice valve with a heater union look at where it it attached in the spa if it is attached to the pump and the plumbing is 1 1/2" and the pump wetend threads are 1 1/2" then this part is correct. You can find this setup in a spa with a 2" Heater setup so be sure to measure the pump union threads. This part is used in hot tubs to stop the water so you could service the heater or the pump without draining the tub.
Note: We offer this Union and Valve Kit individually too Here: Hot Tub Spa Kit with Slice Valve 1 1/2" & 1 1/2" Pump Union How to Video