Pumps and Related Parts

This pump is a Waterway Genesis Generation Energy Efficient Bath Pump 7.5 amps 115 Volts w/Air Switch The Plumbing connections are 1 1/2" on the Pressure and Suction sides which measure about 2 3/8" across the threads.. There are two barbed fittings on...

 Vico/Balboa Ultima Ultra Flo or Ultra Jet Pump ImpellerClosed face impeller made for the Ultima and Ultra Flo spa pumps by Vico. Rated at 3.0hp,which is between 10 and 12 Amps.. it is used in an Ultima, Ultra Jet and/or Ultra Flo pump wet end, and...

This item is a 48 Frame Vico Wet End with 2" x 2" inlet and outlet that would measure about 3" across the threads and it has a 4.0HP impeller which would fit a motor that has 12.0-14.0 amps at 230V and there are no 115V motors this fits.. Pump to Motor...

This Shaft seal only fits CMP Wet Ends.. Watch the video to determine if your wet end is a CMP, Aqua-Flo or a Guangdong LX before ordering.. For the 3HP Impeller that this seal fits click this link:Impeller, CMP, Universal, Wet End, 3.0hp, 2" x 2" Mpt,...

This Pump is a 48Frame 115V 2 Speed with a 1.5 HP Wet End that features a 1 1/2" x 1 1/2" Side Discharge Wet End that measures about 2 5/16" across the threads...  High speed Amperage is 13.3 and low speed is 4.1 Amps..     Complete Pump...

This Pump is a Complete Pump for Watkins Hot Spring Hot Tubs under the numbers 0982701 with a Vendor Code 04281... This pump is a 48Frame 230V 2 Speed with a 2.0 HP Wet End that features a 2" x 2" inlet and outlet Wet End that measures about 3" across...

This Jet Pump is found from the factory Rarely in hot tubs so be sure you are choosing the correct one.   This pump is a 56 frame XP2e called 5.0HP I would call it a 4.5HP 230V Side Discharge wet end with a 2 1/2" suction side which measures about...

This Jet Pump is found from the factory Rarely in hot tubs so be sure you are choosing the correct one.   This pump is a 56 frame XP2e called 4.0HP I would call it a 3.0HP 230V Side Discharge wet end with a 2 1/2" suction side which measures about...

This Jet Pump is found from the factory Rarely in hot tubs so be sure you are choosing the correct one.   This pump is a 56 frame XP2e called 3.0HP I would call it a 2.0HP 230V Side Discharge wet end with a 2 1/2" suction side which measures about...

This Vendor Code 3536 2.5 Horse Power Impeller, Seal, Silicon & Seal Installation Tool that fits a 56 Frame Pump Wet Ends manufactured by Intertek for Watkins 39578-03, 37066-03 or 0982601-03 only.  See NOTES Below... Watch the...

This part is a Pump Bleeder Barb for some Watkins Wavemaster LX Pumps and others.. It is 1/2" Barb x 1/4"Mpt and is used with an unusually large bleeder line.. The line is 1/2" Inside Diameter not 3/8" Inside Diameter like most bleeder lines.. This...

As of 11/2024 Aqua-flo has started to send this pump with a capacitor bump in an odd spot that may affect your installation. In light of that we are now sending this pump assembly out as a separate 10.5 Amp motor and a genuine 2.5 HP XP2 wetend. You...