Pumps and Related Parts

This 2.5HP Impeller fits a Jacuzzi Piranha 4 Stand Wet End Fixed Bracket Motor only and would be found on a motor that is about 11.0 Amps on a 230V motor..... It can be found under the Name Thera-Max or Thera-Flo on Sundance tubs and is also on Jacuzzi...

Note: When you order this pump you will receive the newest version of the pump which is a baseless 2.5 HP pump and you will receive the base as well.. This will be able to be installed in any position but you will have to install the base which may not...

Note: When you order this pump you will receive the newest 2.5 HP version of the pump which is a baseless and you will receive the base as well.. This will be able to be installed in any position but you will have to install the base which may not line...

This 2.0 Horse Power 230V 10.0/3.0 Amp (2) Speed 48 Frame Complete Pump is a Lingxiao LX Brand Pump. These pumps usually have the part number 48WUA2002C-II on the label for a Watkins Version. Watch the video for instruction on how to...

This part is a Bath Style (1) Speed Jacuzzi J-Pump, 115v, J Pump Style Fitting, 7.5A, w/Air Switch...   Note: This pump is equipped with an air switch. If the motor does not start upon plugging it in, the switch may be in the off position. ...

This part is a Used cover Face Plate 56 Frame A.O. Smith Motor.... Note: This is a used part because there are no new offered without the complete motor and the condition will vary although we will not send you a cover that is not useable..

This pump is an Aqua-Flo XP2 48frame 230V 2 Speed with a 2" x 2" Wet End  that measures about 3" across the threads.. The amperage is 8.5 Amps on high speed and 2.8 Amps on low speed and this pump will work as a one or speed pump.. If you need...

Note: When you order this pump you will receive the newest version of the pump which is a baseless and you will receive the base as well.. This will be able to be installed in any position but you will have to install the base which may not line up with...

This pump is the Waterway Version of an Aqua-Flo XP2 or XP2E.. It is an exact replacement for the Aqua-Flo Xp2e 56fr pump.. Voltage 230V, 60Hz High speed 10 Amps, low speed 3.5 Amps Competitive power 3.5 HP, input power 3.08 HP, output power 2.5 HP ...

This Kit fits a 1019801-03 Vendor Code 3536 Watkins 2 HP Pump and Includes an Impeller, Seal, Bearing, Silicon and Seal Installation Tool... It is about 4 1/8"" across the face edge to edge, it measures about 3" from the tip of the front to...

This part is a Pump Bleeder Barb for some Watkins Wavemaster XP2, XP2E, LX and others.. It is 1/4" Barb x 1/4"Mpt and is used with an unusual bleeder line.. The line is 1/4" Inside Diameter not 3/8" Inside Diameter like most bleeder lines.. This...

  This Complete Wet End fits a 1019801-03 Vendor Code 3536 2 HP 56 Frame Pump.. It is about 7 1/4"" across the face of the pump, it measures about 7 3/8" from the bottom to the top of the pressure side of the volute, it also...