Pump Wet Ends and Related Parts

This part is a Wear Ring measures 2 5/8" inside Diameter and fits all Aqua-Flo XP2e and Xp3 Impellers except the 3.0HP Xp2e Impeller... The Odd 3.0HP Impeller requires a different Wear Ring which measures 2 3/8" Inside Diameter.. Look at the chart in...

You are buying a 5 HP 56 Frame Waterway Executive 2" X 2" Wet End / Pump complete with Screws, Volute, Impeller, Seal, Face, Wear Ring, Bleeder Barb and Silicon.  The Bleeder Barb Replaces one of the plugs and is used to reconnect your previous 3/8"...

This part is a Complete FMHP 1.5HP Aqua-Flo 1 1/2" x 1 1/2" (Which measures about 2 3/8" Across the Threads) Side discharge 48 frame wet end for FMHP pumps. This wet end is used with a 48 frame motor that would have about 9.0 Amps on High Speed on a 230V...

 Vico/Balboa Ultima Ultra Flo or Ultra Jet Pump ImpellerClosed face impeller made for the Ultima and Ultra Flo spa pumps by Vico. Rated at 3.0hp,which is between 10 and 12 Amps.. it is used in an Ultima, Ultra Jet and/or Ultra Flo pump wet end, and...

This item is a 48 Frame Vico Wet End with 2" x 2" inlet and outlet that would measure about 3" across the threads and it has a 4.0HP impeller which would fit a motor that has 12.0-14.0 amps at 230V and there are no 115V motors this fits.. Pump to Motor...

This Pump is a Complete Pump for Watkins Hot Spring Hot Tubs under the numbers 0982701 with a Vendor Code 04281... This pump is a 48Frame 230V 2 Speed with a 2.0 HP Wet End that features a 2" x 2" inlet and outlet Wet End that measures about 3" across...

This Vendor Code 3536 2.5 Horse Power Impeller, Seal, Silicon & Seal Installation Tool that fits a 56 Frame Pump Wet Ends manufactured by Intertek for Watkins 39578-03, 37066-03 or 0982601-03 only.  See NOTES Below... Watch the...

This part is a Pump Bleeder Barb for some Watkins Wavemaster LX Pumps and others.. It is 1/2" Barb x 1/4"Mpt and is used with an unusually large bleeder line.. The line is 1/2" Inside Diameter not 3/8" Inside Diameter like most bleeder lines.. This...

As of 11/2024 Aqua-flo has started to send this pump with a capacitor bump in an odd spot that may affect your installation. In light of that we are now sending this pump assembly out as a separate 10.5 Amp motor and a genuine 2.5 HP XP2 wetend. You...

This 2.5HP Impeller fits a Jacuzzi Piranha 4 Stand Wet End Fixed Bracket Motor only and would be found on a motor that is about 11.0 Amps on a 230V motor..... It can be found under the Name Thera-Max or Thera-Flo on Sundance tubs and is also on Jacuzzi...

This Kit fits a 1019801-03 Vendor Code 3536 Watkins 2 HP Pump and Includes an Impeller, Seal, Bearing, Silicon and Seal Installation Tool... It is about 4 1/8"" across the face edge to edge, it measures about 3" from the tip of the front to...