Pump Wet Ends and Related Parts

This part is a Pump Bleeder Barb for some Watkins Wavemaster XP2, XP2E, LX and others.. It is 1/4" Barb x 1/4"Mpt and is used with an unusual bleeder line.. The line is 1/4" Inside Diameter not 3/8" Inside Diameter like most bleeder lines.. This...

  This Complete Wet End fits a 1019801-03 Vendor Code 3536 2 HP 56 Frame Pump.. It is about 7 1/4"" across the face of the pump, it measures about 7 3/8" from the bottom to the top of the pressure side of the volute, it also...

This Watkins 1019801-03, 0977601-03 or 39577-03, Vendor Code 3536 2HP Impeller, Seal, Silicon and Seal Installation Tool that fits 56 Frame Pump Wet Ends manufactured by Intertek LX Brand only. It is about 4 1/8"" across the face...

This part is a Kit that features (2) Seal, (1) Bearing, Seal Tool and Silicon that fit a Watkins, Piranha, Vendor Code 0302, 1.65hp, Wavemaster. To Install you should put silicone sealant on the back of the Metal part and gently push it into place. Also...

This part is a Kit that features (1) Seal, (1) Bearing, Seal Tool and Silicon that fit a Watkins, Piranha, Vendor Code 0302, 1.65hp, Wavemaster. To Install you should put silicone sealant on the back of the Metal part and gently push it into place. Also...

This part is a Kit that features (1) Seal, Seal Tool and Silicon that fit Pump Seal Kit with Silicon , that fits a Watkins, Vico, Vendor Code 0302, 1.65hp, Wavemaster To Install you should put silicone sealant on the back of the Metal part and gently...

This parts is a Watkins, 36675, Vendor Code 0302, 1.65HP Impeller, Wavemaster 7000 Click here for the Seal for this impeller Vico Seal Options Impeller Type Closed Face Impeller Diameter OD 3-13/16" Vane Width ID 1/2" Eye Diameter OD 2-1/4" ...

This Pump is a Complete Pump for Watkins Hot Spring Hot Tubs under the numbers 06115734-1 with a Vendor Code 4081, Wavemaster 6000 or 6500... This pump is a 48Frame 230V 2 Speed with a 1.5 HP Wet End that features a 2" x 2" inlet and outlet Wet End that...

Waterway Hi-Flo Wet EndSide discharge, 2"mbt suction/discharge, 48 frame wet end for the Waterway Hi-Flo pump. This wet end is used with a 1.0hp, 48 frame, thru-bolt style motor. The motor used may be either a single or dual speed. The wet end may be...

This is a XP2 1.5HP Seal & Impeller with a 2 1/8" Eye Width and a 5/16" Vane Width and 4" OD for an Aqua-Flo 48 or 56 Frame Wet End 1.5HP Motor that has about 9.0 Amps at 230V. This Impeller fits between the Face and the Volute of an...

This kits is a Waterway Viper Pump 5.0 Impeller, (2) Bearing, Seal, Install Tool and Silicone.. A Waterway Viper pump which has 2 1/2" inlet and outlet which measures about 3 9/16" across the threads...I have found this 5HP pump impeller to be on a...

This kits is a Waterway Viper Pump 5.0 Impeller, (1) Bearing, Seal, Install Tool and Silicone.. A Waterway Viper pump which has 2 1/2" inlet and outlet which measures about 3 9/16" across the threads...I have found this 5HP pump impeller to be on a...