XP & XP2 Impellers and Related Parts
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Impeller & Seal (2) Bearing Kit Aqua-Flo XP2 1.0 HP 2 1/8" Eye with 1/4" Vane Width 3 7/8" OD
HTPOFAmerica
MSRP: $99.99$74.99This is a 1HP (2) Bearing, Seal & Impeller Kit with a 2 1/8" Eye with 1/4" Vane Width and 3 7/8" OD for an Aqua-Flo 48 or 56 Frame Wet End 1.0HP Motor would be about 8.0 Amps on high speed at 230V or 12.0 Amps at 115V. This Impeller fits...MSRP: $99.99$74.99 -
How To Video Aqua Flo XP2 or XP2e Impeller Identification Methods How To
Spa Guy How To Videos
$0.00In this Video The Spa Guy shows you how to identify what Impeller you need to replace your Aqua-Flo Xp2 or XP2e pump impeller... Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save$0.00Qty in Cart: 0Quantity:Price:$0.00Subtotal: -
XP2 1.0 HP Impeller Aqua-Flo 2 1/8" Eye with 1/4" Vane Width 3 7/8" OD 230/8A or 115/12A
HTPOFAmerica
MSRP: $44.99$34.99This is a 1HP Impeller with a 2 1/8" Eye with 1/4" Vane Width and 3 7/8" OD for an Aqua-Flo 48 or 56 Frame Wet End 1.0HP Motor would be about 8.0 Amps on high speed at 230V or 12.0 Amps at 115V. This Impeller fits between the Face and the Volute...MSRP: $44.99$34.99 -
Motor Bearing High Quality 6203 15.9mm FITS Some MOTORS
HTPOFAmerica
MSRP: $31.20$14.99You are buying (1) Bearing that fit some motors that are used in hot tubs, usually small 48 frame motors and some circulation pumps, this bearing is 15.9MM ID x 40MM OD. Some of the motors this fits are A.O.Smith/Regal Beloit, Century/Regal Beloit,...MSRP: $31.20$14.99 -
XP2 3.0 HP Impeller Aqua-Flo 2 1/8" Eye with 3/8" Vane Width 4 3/8" OD 230/12A
HTPOFAmerica
MSRP: $44.99$34.99This is a 3HP Impeller with a 2 1/8" Eye with 3/8" Vane Width and 4 3/8" OD for an Aqua-Flo 48 or 56 Frame Wet End 3.0HP Motor which would have about 12.0A on high speed. This Impeller fits between the Face and the Volute of an Aqua-Flo XP2 or FMXP2 Wet...MSRP: $44.99$34.99 -
Drain Plug Adapter, Gecko, AquaFlo XP2, XP2E, 1/4" Barb x 1/4"Mpt, Bleeder, Watkins
HTPOFAmerica
MSRP: $13.99$9.99This part is a Pump Bleeder Barb with O-Ring that is found on some Aqua-Flo Xp2 and Xp2e wet ends but is used with an unusual bleeder line.. The line is 1/4" Inside Diameter not 3/8" Inside Diameter like most bleeder lines.. This part does come with the...MSRP: $13.99$9.99 -
XP2 2.5 HP Impeller Aqua-Flo 2 1/8" Eye with 3/8" Vane Width 4 3/8" OD 230/11A
HTPOFAmerica
MSRP: $44.99$34.99This is a 2.5HP Impeller with a 2 1/8" Eye width and 5/16" Vane width and 4" OD for anAqua-Flo 48 or 56 Frame Wet End 2.5HP Motor that is about 11.0 Amps on High Speed. This Impeller fits between the Face and the Volute of an Aqua-Flo XP2 or FMXP2 Wet...MSRP: $44.99$34.99 -
2 1/8" Wear Ring, Aqua-Flo XP, XP2 All Horsepower Impellers
HTPOFAmerica
MSRP: $10.43$8.49This item is a 2 1/8" wear ring that is used between the impeller and the wet end face on Aqua-Flo XP or XP2 Pumps. This wear ring is for all Horse Powers on 48 or 56 frame XP2 Wet Ends. This wear ring serves as a seal between the suction and pressure...MSRP: $10.43$8.49 -
XP2 1.5 HP Impeller Aqua-Flo 2 1/8" Eye with 5/16" Vane Width 4" OD 230/9A or 115/14A
HTPOFAmerica
MSRP: $44.99$34.99This is a 1.5HP Impeller with a 2 1/8" Eye Width and a 5/16" Vane Width and 4" OD for an Aqua-Flo 48 or 56 Frame Wet End 1.5HP Motor that has about 9.0 Amps at 230V. This Impeller fits between the Face and the Volute of an Aqua-Flo XP2 or FMXP2 Wet End...MSRP: $44.99$34.99 -
XP2 2.0 HP Impeller Aqua-Flo 2 1/8" Eye with 1/4" Vane Width 4 3/8" OD 230/10A or 115/16A
HTPOFAmerica
MSRP: $44.99$34.99This is a 2HP Impeller with a 2 1/8" Eye width and 1/4" Vane width and 4 3/8" OD for an Aqua-Flo 48 or 56 Frame Wet End 2.0HP Motor would be about 10.0 Amps on high speed at 230V or 16.0 Amps High Speed at 115V. This Impeller fits between the Face and...MSRP: $44.99$34.99 -
Aqua-Flo, XP, Face, O-Ring, Wet End , Flo-Master, 6" Inside Diameter, 1/8" Thick
HTPOFAmerica
MSRP: $6.99$4.99Aqua-Flo Xp2 Flo-Master 48Frame Pump Face O-Ring Only fits around the Face of a Xp Pump Face exclusively for An Aqua-Flo Xp 48 frame pump which has 2" inlet and outlet which measures about 3" across the threads... If you have a Xp2 56frame 6.1" or 6'3"...MSRP: $6.99$4.99 -
Pump Seal (Better) PS-3867 Viton Like a PS-200 Fits Most Aqua-Flo Wet Ends, Salt/Ozone
HTPOFAmerica
MSRP: $28.99$18.99This Seal is a Salt/Ozone resistant PS-3867 which is the Better - Viton Carbon Graphite version of the PS-200 Seal used Primarily in Aqua-Flo Wet Ends and Waterway "Viper" Wet Ends. It is 1 1/4" Across the back of the Spring Seal part that goes onto...MSRP: $28.99$18.99