Pumps and Related Parts

You are buying a 1 HP 48 Frame Waterway Executive 2" X 2" Wet End / Pump and Barb Kit complete with Screws, Volute, Impeller, Seal, Face, Wear Ring, Silicon & a Barb that you attach a 3/8" Bleeder line to. The difference between a 48 or 56 Frame...

You are buying a 5 HP 48 Frame Waterway Executive 2" X 2" Wet End / Pump complete with Screws, Volute, Impeller, Seal, Face and the Wear Ring. The difference between a 48 or 56 Frame wet end is the spacing of the Motor Thru bolts. The 48 Frame will be 3...

You are buying a 1 HP 48 Frame Waterway Executive 2" X 2" Wet End / Pump complete with Screws, Volute, Impeller, Seal, Face and the Wear Ring. The difference between a 48 or 56 Frame wet end is the spacing of the Motor Thru bolts. The 48 Frame will be 3...

This is a Waterway Executive 115V 1 .5HP 48fr 2 1/2" x 2".. This pump is a very unusual one as it has a 2 1/2" Suction Side which measures about 3 1/2" edge to edge on the threads on the front suction side and 2" on the pressure side top which measures...

You are purchasing (1) Threaded Rubber Pump Motor Base Vibration Dampener for some Jacuzzi or Sundance Hot Tubs. Most of these tubs require (4) of these and will break in two parts causing issues.. These do not come with the nut or washers you will...

This 115V Laing E-10 pump with a 3/4" Threaded Suction and Pressure Side is compact and lightweight, less than 5 lbs. It is whisper quiet, highly efficient and designed with the latest EC (electronically commutated) technology. The Laing E-10 is...

This item is a 3/4HP Waterway HiFlo Pump Impeller "B" Kit which included the Seal Kit as well.. If Your motor is 115V the amperage would be about 10 Amp if 230V it would be about 7 amps..Closed face impeller made for the HiFlo side discharge...

Vico, Big Foot Pump Impeller, Found on many different brands but on some Sundance Brand tubs too.. Closed face impeller made for the Big Foot spa pumps by Vico. Rated at 2.5hp,which would be 10-11.0 Amps.. Click here for the Seal for this impeller Vico...

Vico, Big Foot Pump Impeller, Found on many different brands but on some Sundance Brand tubs too.. Closed face impeller made for the Big Foot spa pumps by Vico. Rated at 4.0hp,which would be 13-14.0 Amps.. Click here for the Seal for this impeller Vico...

This part is a Starter Capacitor that fits many 115V and 230V Pump Motors. When diagnosing pumps for a no start condition where it is powered up but just hums you can hand spin start the motor by taking a screw driver to the shaft in the back and...

This Part is an 48 Frame 2.0HP TMCP Aqua-Flo Wet End for a Garden Tub Bath Pump that has a voltage of 115V and an Amperage of about 16 Amps..  Note: The outside measurement of the threads on this wet end are about 2 3/8" meaning the inside...

This Part is an 48 Frame 1.5HP TMCP Aqua-Flo Wet End for a Garden Tub Bath Pump that has a voltage of 115V and an Amperage of about 14 Amps..  Note: The outside measurement of the threads on this wet end are about 2 3/8" meaning the inside...