Cal Spa Hot Tub Parts

This kit is a 2" Slip X Dead End X (4) 3/4" Barbs X (1) 3/4" Barb manifold repair kit for freeze damaged Cal Spa or Coleman Spas. The manifolds are found on the left front side of the tub usually and has 4 lines and the drain attached to...

These are now obsolete now click this link for the solution.. You will not need all of these parts but we can't get it without them: Lo-Pro Floor Drain, 3/4" Slip Barb Ell, Dark-Silver-Glitter, 3-1/2" Face Width This part is a Cal Spa Hot Tub...

You are buying a Set of (2) 2" Heater Split Nut with 2" Slip X 2" Thread Heater Union Kit which includes (2) Split Nuts , (4) Screws, (2) 2" Slip X 2" Threaded Unions and gaskets for use with a 2" Heater Union as well as (2) 2" Slip x 2" Street...

You are buying a 2" Heater Split Nut with 2" Slip X 2" Thread Heater Union Kit which includes the split nut , (2) Screws, 2" Slip X 2" Threaded Union and a gasket for use with a 2" Heater Union as well as a 2" Slip x 2" Street Slice Gate Valve. The...

This part is a Set of 2" Heater Split Nut with 2" Slip X 2" Thread Heater Union Kit which includes (2) split nuts , (4) Screws,(2) 2" Slip X 2" Threaded Unions and (2) gaskets for use with a 2" Heater Union. The Heater Flange Split Nut mounts to the...

You are buying a 2" Heater Split Nut with 2" Slip X 2" Thread Heater Union Kit which includes the split nut , (2) Screws, 2" Slip X 2" Threaded Union and a gasket for use with a 2" Heater Union. The Heater Flange Split Nut mounts to the heater tube...

This part is a 3.0HP Power-Right Pump Impeller that would be found on a motor with about 12.0 Amps at 230V.. Closed face impeller made for the Power-Right 3.0ohp/6.0thp spa pump. Rated at 3.0hp, it is used in the Power-Right 9089X, 9094X, 9121X, PRC504...

This Filter is 14-7/8" tall x 5" wide it has 2 1/8" holes on the top and bottom. This filter does fit some Cal Spas but looks very silmilar to a standard sized filter which is 13 5/16" tall but this filter is slightly taller at 14 7/8". Please...

This part is a Diverter Kit with a Stem, Silver "S" Style 4 5/16" Long Diverter Handle, Graphite 3 11/16" Graphite Cap & O-ring Kit. This Diverter Knob has a S Shaped Top and mounts on top of the Diverter Valve Stem Square that is...

This part is a Reinforced "S" Style 4 5/16" Gray Spa Diverter Handle Knob only. This Diverter Knob has a S Shaped Top and mounts on top of the Diverter Valve Stem Square that is about 7/16" Wide sticking through the diverter cap. The...

This part is a Silver "S" Style 4 5/16" Long Diverter Handle and Graphite 3 11/16" Graphite Cap & O-ring Kit only. This Diverter Knob has a S Shaped Top and mounts on top of the Diverter Valve Stem Square that is about 7/16" Wide...